Use our 360° application guide to get closer to how we are improving
energy efficiency and enhancing equipment protection through
lubrication.
Welcome to our virtual construction scene: Protecting equipment and
on-site productivity in construction.
Explore the construction hotspots where effective lubrication can
protect vital components, reduce machine downtime, and drive
productivity among construction crews working in even the harshest
of conditions.
Navigating the tool is simple on either desktop or mobile:
On the initial screen, click/tap and hold to rotate your view
Click/tap on the labelled hotspots to zoom in for more detail
Scroll up and down (or pinch the screen with two fingers) to zoom
in and out from the hotspots
Click/tap and hold to rotate your view when zoomed into a hotspot
Zoom out from a hotspot to return to the initial screen
Click ‘Start’ to begin the experience!
Please note,
this tool is for illustrative purposes only. The size, layout and
detail of the equipment, machinery and processes displayed may not
show a 100% accurate representation relative to each construction
operation set-up.
Heavy-duty diesel engines: Protecting equipment with heavy-duty
diesel engine oils
Over time, metal-to-metal contact – caused by low speeds, high
loads, cold starts, shock loading and extended idling – can cause
engine damage. These daily demands on your equipment require an
engine oil with adequate viscosity control in extreme conditions to
prevent abrasive wear. The Shell Rimula range of heavy-duty diesel
engine oils – featuring adaptive technology – provide this
protection, maximising machine efficiency and reducing fuel
consumption to deliver operational savings.
Transmission systems: Reducing downtime with transmission oils
Dirt, dust, and water from your site can break down your oil,
limiting its effectiveness and exposing your transmission to wear. A
high-quality transmission oil with good oxidation resistance can
limit this degradation, reducing downtime by reducing oil change
frequency. Featuring special frictional properties and high
fluidity, the Shell Spirax range provides exceptional protection for
heavy-duty transmission systems – keeping your equipment running
smoothly for longer to improve efficiency and productivity on your
site.
Swing Bearing and Gear: Performing in the toughest conditions with
gear greases
On-site conditions are often unpredictable – and this can have a
significant impact on your wheel and gearbox bearings. To protect
components and keep them moving as they should, you need a
high-quality grease that can maintain performance, even in the
harshest settings. The Shell Gadus range of greases is developed to
deliver this reliable level of performance, providing mechanical
stability to avoid breakdowns, oxidation stability for system
efficiency, and water washout resistance for excellent corrosion
protection.
Hydraulics: Preventing equipment failure with hydraulic fluids
Hydraulic fluids play several important roles in construction
equipment, from optimising efficiency and operability to reducing
noise onsite. They also keep machinery running smoothly; protecting
and lubricating components to support the efficient power
transmission. However, uneven terrain exposes your oil to
contamination, accelerating component wear and reducing oil life.
This often leads to reduced component performance and even equipment
failure. To prevent this, a hydraulic fluid must offer reliable air
release, excellent filterability, and improved cleanliness. The
Shell Tellus range of hydraulic fluids provides this protection to
deliver greater system efficiency, while the Shell Naturelle range
of biodegradable lubricants offers reliable equipment protection
while helping to reduce the environmental impact of your on-site
operations.
Equipment idling is a significant challenge for construction sites.
And, without the ability to monitor equipment utilisation, operators
run the risk of increased downtime, reduced productivity, and
increased costs. MachineMax helps to remove that risk, providing
companies with a cutting-edge telematics solution that enables them
to maximise the profitability of their on-site fleets. It allows
construction teams to monitor their operations on one platform
(regardless of whether equipment is owned or hired), allowing
companies to improve site efficiency, increase fuel efficiency, and
reduce CO2 emissions.